160 Ton Capacity Stamtec Press For Sale

160 Ton Capacity Stamtec Press
  • Model: G1-160-S
  • Year: 1985
  • Capacity: 160 Tons
  • Stroke: 8″
  • Slide Adjustment: 3.94″
  • Shut Height: 17.7″
  • Speed: 40 SPM
  • Bed Area: 49″ x 31.5″
  • Slide Area: 28″ x 21.5″
  • Equipped With: Air Clutch and Brake, Air Counter Balances, Controls

Mori Seiki SL-250 CNC Lathe Turning Center For Sale

Mori Seiki SL-250 CNC Lathe Turning Center For Sale (model up from SL-200)

  • Year: 1999
  • Model: SL-250BSMC/500
  • Run Time: 14,550 hours
  • Swing Over Bed / Cross Slide:  26.8″/ 22.6″
  • Maximum Turning Diameter: 15.3″
  • Standard Turning Diameter: 8.27”
  • Distance Between Centers: 22.6″
  • Max Turning Length: 19.10″
  • Spindle Speeds: 35-3500
  • Spindle Motor:  20/15
  • Spindle Nose: A2-8
  • Min. Spindle Index Angle: .001”
  • Spindle Bore:  3.3″
  • Max Bar Size:  2.9″
  • Turret Stations: 10
  • Turret Index Time:  0.2 Sec
  • Square Tool Capacity: 1″
  • Boring Bar Capacity: 2.0″
  • Axis Travel:
    • Z- Axis:  19.5″
    • X- Axis:  6.3″
  • Live Milling: 10 Positions
  • Live Milling RPM: 3,000RPM
  • Live Milling HP: 8/5.8 HP
  • Rapid Travels: X and Z : 708/944.9 IPM
  • Tail Stock Taper: MT # 5
  • Tail Stock Travel: 4.7”
  • Machine Dimensions: 93.7″ x 69.3″ x 74.2″ high
  • Power: 220v/3ph

Equipped With:

  • MORI SEIKI-Fanuc MSC-501 (Fanuc 18i) CNC CONTROL
  • RS-232C PORT INTERFACE FOR DNC OPERATION
  • IN-MACHINE TOOL PRE-SETTER
  • TAILSTOCK
  • 20 HP SPINDLE
  • STANDARD COOLANT SYSTEM WITH TANK & PUMP
  • MAYFRAN CHIP CONVEYOR
  • COLLET CHUCK INCLUDED (WITH SOME COLLETS)

Note:

  • Does Not Include Bar Feeder
  • Machine was recently removed from service on 2.10.17 and runs good

Mori Seiki CNC Lathe For Sale http://wp.me/p6NdBQ-2we Mori Seiki CNC Lathe For Sale http://wp.me/p6NdBQ-2we Mori Seiki CNC Lathe For Sale http://wp.me/p6NdBQ-2we Mori Seiki SL-250 For Sale CNC Lathe http://wp.me/p6NdBQ-2we Mori Seiki SL-250 For Sale CNC Lathe http://wp.me/p6NdBQ-2we Mori Seiki SL-250 For Sale CNC Lathe http://wp.me/p6NdBQ-2we Mori Seiki SL-250 For Sale CNC Lathe http://wp.me/p6NdBQ-2we Mori Seiki SL-250 For Sale CNC Lathe http://wp.me/p6NdBQ-2weMori Seiki CNC Lathe For Sale http://wp.me/p6NdBQ-2weMori Seiki CNC Lathe For Sale http://wp.me/p6NdBQ-2we

 

25 Ton Used Dake C Frame Hydraulic Press For Sale

Dake C Frame Hydraulic Press For Sale – Used 

2 Post Guided Platen Design
Year 1994
Capacity: Pressing 25 Tons
               Return 10 Tons
Speed: Rapid Advanced 394 IPM
           Pressing 53 IPM
           Return 411 IPM
Stroke: 21″
Daylight 40″
Bed Area 48″ x 22″
Slide Area 34″ x 15 3/4″
Overall Dimension — Height 121″ x 54″ Wide x 62″ Front to Back
Motor 10 HP – 1200 RPM – 460 Volt – 3 Phase – 60 Cycle
Equipped with: Allen Bradley Control, STI light curtains
Note: Press has been sitting in storage for some time and needs to be cleaned up
25 Ton Used Dake C Frame Hydraulic Press For Sale 25 Ton Used Dake C Frame Hydraulic Press For Sale