25 Ton Used Dake C Frame Hydraulic Press For Sale

Dake C Frame Hydraulic Press For Sale – Used 

2 Post Guided Platen Design
Year 1994
Capacity: Pressing 25 Tons
               Return 10 Tons
Speed: Rapid Advanced 394 IPM
           Pressing 53 IPM
           Return 411 IPM
Stroke: 21″
Daylight 40″
Bed Area 48″ x 22″
Slide Area 34″ x 15 3/4″
Overall Dimension — Height 121″ x 54″ Wide x 62″ Front to Back
Motor 10 HP – 1200 RPM – 460 Volt – 3 Phase – 60 Cycle
Equipped with: Allen Bradley Control, STI light curtains
Note: Press has been sitting in storage for some time and needs to be cleaned up

Click Here For Updates on Machines & Equipment As They Become Available

25 Ton Used Dake C Frame Hydraulic Press For Sale 25 Ton Used Dake C Frame Hydraulic Press For Sale

125 Ton Capacity Minster Piece-Maker Press For Sale

125 Ton Capacity Minster Piece-Maker Press

  • Model: PM3-125-48-32
  • Year: New in 1990
  • Capacity: 125 Tons
  • Bed Area: 48″ x 32″
  • Stroke: 2.5″
  • Shut Height: 25.5″
  • Adjustment: 2″
  • Speed: 190 to 400 SPM
  • Equipped With: Minster Automatic Feedline (Servo Feeder Model: MEF4-10) (Sraightener Model: MS20-10-7) (Coil Reel Model: MR6-145)

125-ton-capacity-minster-press-for-sale-1 125-ton-capacity-minster-press-for-sale-2 125-ton-capacity-minster-press-for-sale-3 125-ton-capacity-minster-press-for-sale-4

220 Ton Capacity Aida Single-Point Gap Press For Sale

220 Ton Capacity Aida Single-Point Gap Press For Sale

  • Model: NC1-200(2)
  • Year: New in 1990
  • Capacity: 220 Ton
  • Bed Area: 55″ x 33″
  • Stroke: 9.5″
  • Shut Height: 26.5″ to Bed
  • Slide Adj.: 4″
  • Slide Surface Area: 35″ x 27″
  • Speed: 38 SPM

I’m a Manufacture – Click Here For Updates on Machines & Equipment
220 Ton Capacity Aida Single Point Gap Press For Sale (1) 220 Ton Capacity Aida Single Point Gap Press For Sale (2) 220 Ton Capacity Aida Single Point Gap Press For Sale (3) 220 Ton Capacity Aida Single Point Gap Press For Sale (4) 220 Ton Capacity Aida Single Point Gap Press For Sale (5)

250 Ton Minster Tranemo Press For Sale

250 Ton Minster Tranemo Press
  • Capacity: 250 Tons
  • Model: DPA 250-16
  • Year: 1988
  • Nominal Pressing Force: 250 Tons
  • Die Cushion Force: 125 Tons
  • Ejector Force: 15 Tons
  • Slide Stroke: 19.7″
  • Die Cushion Stroke: 7.9″
  • Ejector Stroke: 9.8″
  • Press Bolster Left – Right: 63.0″
  • Press Bolster Front – Back: 39.4″
  • Press Slide Left – Right: 63.0″
  • Press Slide Front – Back: 39.4″
  • Cushion Top Plate Left – Right: 55.1″
  • Cushion Top Plate Front – Back: 31.5″
  • Open Height (Above Bolster): 31.5″
  • Closed Height (Above Bolster): 11.8″
  • Opening in Frame Columns Width x Height: 29.5″ x 31.5″
  • Total Width Left – Right: 130″
  • Total Depth Front – Back: 102.4″
  • Total Height: 157.5″
  • Height to Press Bolster: 40.4″
  • Total Weight (Approx.): 40,700lbs. 
  • Includes: Cooling System and New Programming 
Speeds – Inches Per Minute
  • Closing Speed: 860
  • Max. Pressing Speed Up to 100 Metric Tons: 85
  • Max. Pressing Speed at 250 Metric Tons: 40
  • Max. Return Speed: 920
  • Max. Return Speed with Engaged Cushion: 310
  • Motor Revolution (RPM): 1,160
  • Motor (HP): 40
  • Max. System Pressure (PSI): 4,420