Wellsaw

Wellsaw

  • Model – 1220G
  • Serial – 289
  • Year 1993
  • New cost today would be $50,000
  • Up to 78″ Diameter
  • Automatic Cutting Force Control and Blade Brake

Wellsaw Saw  (1) Wellsaw Saw  (2) Wellsaw Saw  (3) Wellsaw Saw  (4) Wellsaw Saw  (5) Wellsaw Saw  (6) Wellsaw Saw  (7) Wellsaw Saw  (8) Wellsaw Saw  (9) Wellsaw Saw  (10) Wellsaw Saw  (11) Wellsaw Saw  (12) Wellsaw Saw  (13)

Kasto Cold Saw

Kasto Cold Saw with Power Vise

Year 2006

Cutting range:

  • Cutting range   90°   round Full material   3.94 in.
  • Cutting range   90°   round Tubes   3.94 in.
  • Cutting range   90°   square Tubes   3.54 x 3.54 in.
  • Cutting range   90°   flat square   6.69 x 3.54 in.
  • Cutting range   +/- 45°   round Full material   3.94 in.
  • Cutting range   +/- 45°   round Tubes    3.94 in.
  • Cutting range   +/- 45°   square Tubes    3.54 x 3.54 in.
  • Cutting range   +/- 45°   flat square    4.92 x 3.54 in.
  • Cutting range   + 60°   round Full material   3.54 in.
  • Cutting range   + 60°   round Tubes   3.54 in.
  • Cutting range   + 60°   square Tubes   3.54 x 3.54 in.
  • Cutting range   + 60°   flat square     3.54 x 3.54in.

Dimensions and Weight:

  • Length 23.62 in.
  • Width 47.24 in.
  • Height 86.61 in.
  • Material support height 35.43 in.
  • Total weight 1,100 lbs.

Power characteristics:

  • Power 2.38 / 3.17 HP
  • Voltage 400 Volt / 50 Hz
  • Cutting speed – 118.08/236.16 ft./min or 59.04/118.08 ft./min

Dimensions of saw blade

  • 13.78 x 0.10 x 1.26 in.

Electrical equipment:

  • Supply voltage 220/440 Volts, 3 Ph, 60 Cycles
  • Control voltage 24 V DC

Kasto Cold Saw

Kasto U10 Cold Saw 8 Kasto U10 Cold Saw 7 Kasto U10 Cold Saw 6 Kasto U10 Cold Saw 5 Kasto U10 Cold Saw 4 Kasto U10 Cold Saw 3 Kasto U10 Cold Saw 2 Kasto U10 Cold Saw 1

(SOLD) DoAll Bandsaw For Sale

DoAll Bandsaw For Sale C-305A

  • CAPACITY, RECTANGULAR: 12” X 12”
  • CAPACITY, ROUND: 12″
  • RECOMMENDED SMALLEST DIAMETER: ½”
  • SINGLE AUTOMATIC INDEX LENGTH: 16”
  • MINIMUM BUTT END W/ AUTO FEED: 5”
  • MINIMUM AUTO INDEX LENGTH: ¼”
  • INFINITELY VARIABLE BAND SPEED DRIVE: 60-350 FPM
  • MATERIAL PASS LINE HEIGHT: 30.5”
  • BLADE: 1-1/4” X 144”
  • WHEEL DIAMETER: 15”
  • DRIVE MOTOR: 5 HP
  • HYDRAULIC SYSTEM: 2 HP
  • COOLANT PUMP: 1/10 HP
  • FLOOR SPACE: 8’ X 6’6” X 5’
  • NET WEIGHT: 4,200 LBS
  • ELECTRICS: 220 VOLTS, 3 PH, 60 CYC

EQUIPPED WITH:

  • OVERHEAD BUNDLING
  • COOLANT SYSTEM

doall-horizontal-bandsaw-for-sale-1 doall-horizontal-bandsaw-for-sale-2 doall-horizontal-bandsaw-for-sale-3

doall-horizontal-bandsaw-for-sale-6 doall-horizontal-bandsaw-for-sale-7